Normally, we will install the CNC machining center in the machining workshop. This type of workshop has significant temperature changes, poor environmental conditions, and a variety of electromechanical equipment. In this case, there may be significant fluctuations in the power grid. Therefore, the installation position of the CNC machining center requires strict control of the power supply voltage. The power supply voltage fluctuates within the allowable range and remains relatively stable. Otherwise, it will affect the normal operation of the CNC machining center.

     The position of the CNC machining center should also be away from the vibration source. When there is a vibration source near the CNC machining center, anti vibration grooves should be set up around it. Otherwise, it will directly affect the machining accuracy and stability, or the electronic components may have poor contact and malfunction. This will affect the reliability of the equipment. 

      During the process of using CNC machining centers, we cannot arbitrarily change the parameters of the control system. These parameters are generally set by the manufacturer. The setting of these parameters is directly related to the dynamic characteristics of various components on the CNC machining center. Therefore, it is best for non professionals not to change these settings. Roctech CNC provides excellent after-sales service, and any questions during the use of the equipment can be consulted with after-sales engineers. The after-sales engineer will provide users with clear and satisfactory answers.